Drive hard installation sata

The process of SATA hard drive data recovery is explained near the end of this article. SATA is an abbreviation of Serial Advanced Technology Attachment, a computer bus interface that connects host bus adapters to mass storage devices.

Firstly, SATA cables consist of only 7 conductors instead of 40 or 80, making the interface much more suitable for compact desktop computers and laptops. Additionally, SATA supports hot swapping, a feature that makes it possible to replace or add a hard drive without stopping or shutting down the system.

Furthermore, the SATA interface supports faster data-transfer speeds through higher signaling rates. With these tools, you can make the most out of your SATA hard drive regardless of its size or age. Disk Drill is a comprehensive, feature-rich data recovery suite with several additional tools that you can use to keep your SATA hard drive healthy and your data protected. Unlike many other similarly powerful data recovery solutions , Disk Drill is available for free, and its user interface is as simple as it can be.

Download Disk Drill data recovery app Download now. It can fix broken partition tables, recover boot sectors, fix MFT, and even copy files from deleted partitions. How do I fix a corrupted hard drive without formatting?

Run the antivirus software to kill virus and malware. Update the corrupted, damaged, or outdated driver. Yes, you can plug in a hard drive while the computer is on. SATA cable with a 90 degree plug on one end. You can get different options for the plugs on either end.

You can use a usb cable that comes with your external hard drive to connect it. If it is an internal hard drive. Serial ATA interface disk drives are designed for easy installation. Because of this, there is no jumper to set to make a Serial ATA drive a master or slave on its cable, as it will be the only drive connected to that data cable.

You can use a Serial ATA drive in the same system with Parallel ATA drives as long as both interfaces are supported on the motherboard or with a host adapter. If your system does not have a Serial ATA connector on the motherboard, you must purchase a Serial ATA host adapter that is compatible with your computer and operating system and install it with the appropriate device driver according to the host adapter manufacturer's installation instructions.

Close your computer case and start your computer. Your computer may automatically detect your new drive. If your computer does not automatically detect your new drive, follow the steps below. A new drive is often an upgrade to an existing system.

It could be additional storage or a replacement for an existing drive. In either case, the physical procedures are the same as described above. Since the operating system does not require a fresh installation, preparing your drive for use is easier. For additional storage in Windows, you can use the Disk Management utility. If you need to transfer your data sometimes called data migration or clone you can use the Seagate utility DiscWizard.

A great first step is to download SeaTools diagnostic software. Seagate Partner Program Portal Provides access to product training, sales and marketing resources, deal registration, and more to our VARs, Integrators, Resellers and other channel partners. Seagate Supplier Portal Provides Suppliers with self-service tools targeted to the needs of their business. Connect the insulated power cable with the wider tip into the larger connection port situated on the left-rear of the HDD.

If the power cable does not fit easily, check to make sure that it is not upside down. Connect the data cable to the smaller SATA port on the hard drive. If the power supply is older, it may not have any SATA power connectors. Molex plugs have four pins, and may be white or black.

Connect the data cable to the motherboard. If you are adding a new drive, you will need to connect the data cable to a SATA port on the motherboard if you are replacing and old drive, the data cable should already be connected. SATA ports are usually grouped together and labeled. Your primary boot drive should be connected to the lowest SATA port on your motherboard, unless otherwise specified in your motherboard documentation.

You will need to install a motherboard that supports the SATA format. Finish the installation. Once the hard drive is secured and connected, close up your computer and power it back on. Before you can use your new drive, you will need to format it. If you are replacing the primary drive or building a new computer, you will need to install your operating system. Follow one of the guides below for more detailed instructions: Install Windows 7.

Install Windows 8. Install Linux. Format your new storage drive. Method 2. Turn off the power switch on the back of the power supply, but leave the cable plugged in if possible.

This will help keep you grounded. If you have to unplug everything, be sure to follow Step 2 closely. Open the case using the thumbscrews or a screwdriver if necessary. You will need to remove both side panels on many older cases and some newer ones in order to properly secure the drive. Insert your new optical drive.

Most optical drives are inserted from the front of the case. Secure the drive using two screws on each side, or by using rails if your case has them. Connect the power supply to the optical drive. If your power supply is older, it may only have Molex 4-pin connectors. Connect the optical drive to the motherboard. Use the smaller SATA data cable to connect the optical drive to the motherboard. Use the SATA port on the motherboard directly after your last hard drive. You will need to install a new motherboard if you want to use your SATA drive.

Once the optical drive is secured and connected, you can close up your computer and power it back on. Your new drive should be automatically detected, and any necessary drivers will be installed automatically.